background image

This product is programmed to automatically check and reboot the system, if the product is in 

a non-functional status. By rebooting the system, the product notifies the user that such action 

is taking place.

By safeguarding the system in this manner, the stability of the system is reinforced.

If the system keeps rebooting repeatedly, the program installed in the SD card may have been 

damaged or altered. In this case, please stop the system and format the SD card in PC then 

download the latest Software to use the SD card like it is used for the first time.

-

-

Automatic System Check and Safe Rebooting Function

- While there is no impact, the system records 4 frames/second to save the SD card space and

  returns to normal full frame recording mode making an EVENT file when it detects an impact 

  to the car. 

- ”Auto switching to Parking mode” option is selected as a default setting and it automatically 

  places the unit in the “Parking Mode” once the car does not move for longer than 10 minutes

  after the last driving mode recording. The unit will automatically turn back to “Driving Mode”

  once the unit registers movement.

- If “Auto Parking” mode is selected in configuration, “Parking Mode” recording can be activated 

  when you press and hold the [PLAY] button for more than 3 seconds if “Auto Parking” is 

  relieved in configuration. When the system commences parking mode again, a voice 

  notification will be announced that the parking mode has been initiated.

- Once in Parking Mode, the system automatically rearranges its impact sensing sensitivity to the

  most sensitive in order to register even the slightest impact.

  After making an EVENT file, it returns to 4 frame recording mode again.

- No audio is recorded while parking mode is on.

- To use the parking mode, the product has to be connected to the power source directly.

  In regards to direct wiring to the vehicle’s power source, we recommend using professional 

  help.

- Extensive and continuous use of the vehicle’s power source may exhaust the performance of 

  the product. The company is not liable for the damages from continuous use of the product 

  more than 24 hours. We recommend the full power to be off after use of 2~3 days in order to 

  maintain the product longer. 

Parking Surveillance Mode

Product Use

17

visiondrive.co.kr

Summary of Contents for Black Box VD-9000FHD

































Reviews: