S
CANNING
FROM
W
INDOWS
98SE, ME, 2000,
OR
XP
21
8. Click the
Scan
button at the bottom of the Scan pane.
The Scan Manager opens. Use the Scan Manager to select scanning
options and to start the scanner.
9. From the Scan Method drop-down list, choose whether you are
going to scan a single item (
Flatbed
) or a stack of items (
ADF
).
10. If you want to see what the scanned image will look like before
scanning its final image, click the
Preview
button.
The scanner scans a preview of the item and displays it in the Scan
Manager. You can now use the options on the Scan Manager to
fine-tune the image. For example, to adjust the brightness, drag the
Dark/Light slider. For details on adjusting images, see “Adjusting
the Image with the Scan Manager” on page 24.
11. To preview the item with the new settings, click the
Preview
button again on the Scan Manager.
Note
: If you preview when scanning a stack of documents, the first
page of the stack feeds through the ADF for the preview. After
adjusting the scanner settings, replace that page on the stack so it is
scanned with the rest of the pages.
Choose
Flatbed
to scan
a single item
Choose
ADF
to scan a
stack of documents
Click
Preview
to check
the image
Click
Scan
when you’re
ready to scan