V
ISIONEER
M
OBILITY
S
CANNER
U
SER
’
S
G
UIDE
22
C
LEANING
Y
OUR
S
CANNER
If you still see streaks or lines in the scanned image after calibrating the scanner, use the cleaning swab to
clean the scanner glass.
1.
Dampen the tip of the cleaning swab with some Isopropyl rubbing alcohol (95%)
2.
Facing the back of the scanner,
press and hold
the button on the side of the scanner. This button
separates the glass from the rollers for cleaning.
Note that if you release the button, the glass will be set back in place for scanning. You must press and
hold the button while cleaning.
3.
Insert the tip of the cleaning swab into the back of the scanner.
4.
Swipe the tip across the inside of the scanner from right-to-left. Repeat this 5 or 6 times to
thoroughly clean the scanner.
5.
When you are finished cleaning the scanner, release the button on the side of the scanner. Store the
cleaning swab in a clean, dust-free area.
Summary of Contents for MOBILITY -
