48
V
ISIONEER
O
NE
T
OUCH
7300 USB S
CANNER
I
NSTALLATION
G
UIDE
To manually set the output size for an item:
1. To scan the entire item on the glass, click
Same as Original
. No
sections are trimmed.
2. To set the output size yourself, click
Same as Original
to remove
the checkmark.
The settings for the output size become active.
3. Put the pointer on the image and drag the mouse to enclose the
section you want in the scanned image.
As you drag the mouse, a dotted box appears on the image and the
size settings change to reflect the new output size area. You can also
type in the size settings boxes.
■
Width
and
Height
—The measurements of the final image after
it’s scanned; for example, if you plan to print the image on a
standard paper, the width and height are 8.5 and 11.0 inches.
■
Units
—Units of measurement for the new area; click the drop-
down arrow and choose new units if you want.
■
Resolution
—The dots-per-inch (dpi) setting for the new area.
■
Scale
—The amount of enlargement or reduction of the image to
fill the width and height measurements; for example, if you
select a small area and have set the width and height to a paper
size, the scale automatically increases to enlarge the small image
so it’s the same size as the paper.
