background image

R

EGISTER

 Y

OUR

 S

CANNER

 

AND

 C

HECK

 

FOR

 U

PDATES

23

R

EGISTER

 Y

OUR

 S

CANNER

 

AND

 C

HECK

 

FOR

 U

PDATES

Registering your scanner is important as it provides you with access to 
our free telephone support service. Registration also gives you free access 
to software updates for your scanner.

To register your scanner:

1.

Right-click

 on the OneTouch icon in the Windows Notification 

Area (at the bottom right corner of the screen).

2. Choose 

Check for Online Updates

 from the pop-up menu.

3. Follow the instructions on the screen and register your scanner by 

entering your scanner’s serial number and your email address.

The serial number is located on the side of the scanner.

After registration is complete you will receive an email message with 
your RegID. Your RegID is important as you will need it when 
accessing free telephone support, or checking for online updates. 

4. After receiving your RegID, write it down on a piece of paper and 

keep it with your scanner so you will be able to find it easily.

The OneTouch Icon.

Note

: A valid email address is required.

The Serial Number

Summary of Contents for OneTouch 9650































































































































































Reviews: