S
TEP
1: A
SSEMBLE
THE
S
CANNER
7
5.
Swing the input tray up until it snaps into place.
6.
Plug the ADF cable into the ADF port on the back of the scanner. The
ADF will not work if the cable is loose or not plugged in.
7.
Push the locking tab down to the unlocked position.
8.
When you’re finished assembling the scanner, place it on a level surface on
your desk. If the scanner is on an uneven surface, it may stall when
scanning from the Flatbed.
Note:
The locking tab protects the scanner’s scan head by holding it securely
in position. Lock the scanner when transporting it from one location to
another, but remember to unlock it before scanning. The scanner will not
scan when locked.