C
ONFIGURING
THE
O
NE
T
OUCH
B
UTTONS
65
2.
The Hardware Properties dialog box opens and shows information about
your Visioneer Patriot 680 scanner.
3.
Click the
Properties
button.
Your scanner has a built-in power saving feature that is set to power down
after 15 minutes of idle time. You can change the time before the scanner
powers down, from 1 minute to a maximum of 3 hours.
4.
Click the arrows for the Lamp time-out setting and choose a time setting.
To turn the lamp on and off manually, click the
Lamp On
or
Lamp Off
buttons. To return the scanner to its factory settings, click
Reset Device
.
5.
Click
OK
to save the changes and close the dialog box.