M
AINTENANCE
V
ISIONEER
®
P
ATRIOT
PD45/PH70
S
CANNER
U
SER
G
UIDE
47
6.
Carefully angle the roller up and out of the scanner and then discard it, it cannot be repaired.
7.
Take the new roller out of its packaging. Clean any dust off the roller before installing it.
8.
Insert the left end of the new roller assembly into the hole in the roller channel. Angle the roller module into
the roller channel. Align the tab on the lock flange with the slot in the scanner.
Make sure that the gears on the roller module properly align to the gears in the scanner. Hold the roller
module in the scanner while you lock it in place.
9.
Rotate the locking tab into the slot in the scanner. Push on the lever until it clicks in place and locks the roller
in the scanner.
The lock will “click” into place when it is secure. However, if it does not rotate easily into the housing, make
sure the flange is properly seated in its latch.
Summary of Contents for PATRIOT PD45
