R
ECALIBRATING
OR
C
LEANING
Y
OUR
S
CANNER
115
Maintenance
This chapter contains information on recalibrating, troubleshooting,
cleaning, uninstalling, and scanner specifications.
R
ECALIBRATING
OR
C
LEANING
Y
OUR
S
CANNER
You calibrated your scanner during installation, but after many hours of
use you may find that scanned images may not be a sharp and clear as
when you began using the scanner. In that case, recalibration may solve
the problem.
If your scanned images have streaks, smudges, or dirt spots, you may
need to clean the scanner with the Cleaning Paper.
To recalibrate your scanner:
1. Close the scanner’s back panel so the calibration paper will feed
straight through the scanner.
