1
1. Description
3. Specification
4. Installation
The device is a standalone as well as a Wiegand access control keypad and
proximity card reader which supports EM, HID,and Mifare card types,i t ’ s
one of the most advanced standalone access control .Its build-in USA Atmel
microprocessor,with strong anti-interference ability, high security and reliability,
powerful function and convenient operation.It is widely used in high-end buildings,
residential communities and other public places. This device can be used as standalone
and connected to a central Access Control Panel.
•
Ultra-low power consumption: Standby current is less than 30mA.
•
Input& Output: Wiegand26.
•
Searching Time: Less than 0.1s after reading card.
•
Backlight Keypad: Easy to operate at night.
•
Doorbell interface: Support external wired doorbell.
•
Access ways: Card, code, card+code.
•
Independent codes: Use codes without related card.
•
Change Codes: Users can change codes by themselves.
•
Anti-tamper alarm: Alarm is activated after tear down illegally.
•
Delete Users by card NO.: Delete card NO. by keypad to eliminate security risk
completely.
Install base plate onto wall and attach device using bottom screw
•
Input Voltage: DC 12V
•
Idle Current:≤25mA
•
Card reading distance: 2-3 cm
•
Card Frequency: 125KHz for EM and HID,13.56MHz for Mifare
•
Card transmission format: wiegand26
•
Keypad transmission format:4bit,8bit and Virtual card number
•
Operating Temperature: -45°C~55° C (-49F – 131F)
•
Operating Humidity: 0%~95%
2. Features
