Visionis VIS-3002, User Manual

7

8.11 Set Relay mode

Note: 0~99 is to set the door delay time 0-99 seconds, factory default is 5 seconds

Press  14

  0~99

  # 

Press  15

  0  # 

Relay setting -pulse mode

Note: 1.ID number

 is 1~4 digits, the range is 1~2000, fox example 1,01,001,

0001, all these

          mean ID number 1.

          2. Add card user,it will generate one “1234 “PIN, this PIN can not open door,

           only  for user modify PIN.

Note: It applies to PIN user, pin is irrelevant with card, the PIN is any 4-6 digits, but 

cannot be “1234”.

Note: All users will be deleted

8.8 Delete user

8.9 Set opening door mode

8.10 set door relay time

8.8.1 Read card to delete user

8.9.1 Entry is by card only

8.9.2 Entry is by card and PIN together

8.8.2 Use ID number to delete user

8.8.4 Delete all users

8.8.3 Use card number to delete user 

8.7.4 Use ID number and card number to add user

Press  11   ID number #   8-digits card number #  ... ID number # 8-digits card number #  
...  #

Press  12   read card   read card  ...  #

Press  13  0  # 

Press  13  1  # 

8.9.3 Entry is by card or PIN (factory default)

Press  13  2  # 

Press  12   ID number #   ID number #  ...  #

Press  07  0000  #

Press  12   card number #   card number #  ...  #

8.7.5 Use ID number and PIN to add user

Press  11  ID number # PIN #  ...  ID number # PIN # ... #