Fingerprint Access Control Terminal User Manual
141
Even Parity Start Bit, and Length
If you select Even Parity, these items are available. If the even parity start bit is 12, and the length
is 12, then the system will start even parity calculation from bit 12. It will calculate 12 bits. The
result will be in the last bit.
XOR Parity Start Bit, Length per Group, and Total Length
If you select XOR Parity, these items are available. Depending on the table displayed above, the
start bit is 0, the length per group is 4, and the total length is 40. It means that the system will
calculate from bit 0, calculate every 4 bit, and calculate 40 bits in total (10 groups in total). The
result will be in the last 4 bits. (The result length is the same as the length per group.)
Card ID Start Bit, Length, and Decimal Digit
If you use the transformation rule, these items are available. Depending on the table displayed
above, the card ID start bit is 0, the length is 32, and the decimal digit is 10. It represents that from
bit 0, there are 32 bits represent the card ID. (The length here is calculated by bit.) And the
decimal digit length is 10 bits.
Site Code Start Bit, Length, and Decimal Digit
If you use the transformation rule, these items are available. For detailed information, see the
explanation of the card ID.
OEM Start Bit, Length, and Decimal Digit
If you use the transformation rule, these items are available. For detailed information, see the
explanation of the card ID.
Manufacturer Code Start Bit, Length, and Decimal Digit
If you use the transformation rule, these items are available. Depending on the table displayed
above, the manufacturer code start bit is 32, length is 8, and decimal digit is 3. It represents that
from bit 32, there are 8 bits are manufacturer code. (The length here is calculated by bit.) And the
decimal length is 3.
Summary of Contents for VIS-3013
Page 2: ......
Page 21: ...Fingerprint Access Control Terminal User Manual 7 Figure 4 1 Terminal Diagram...
Page 156: ......
