Fingerprint Access Control Terminal User Manual
56
By default, the user name is
admin
.
Password
Enter the device password.
Caution
The password strength of the device can be automatically checked. We highly recommend
you change the password of your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case letters, lower case letters, numbers,
and special characters) in order to increase the security of your product. And we recommend
you change your password regularly, especially in the high security system, changing the
password monthly or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
7. Optional: Check
Synchronize Time
to synchronize the device time with the PC running the client
after adding the device to the client.
8. Optional: Check
Import to Group
to create a group by the device name, and import all the
channels of the device to this group.
Example
For access control device, its access points, alarm inputs/outputs, and encoding channels (if
exist) will be imported to this group.
9. Click
Add
to add the devices.
8.1.2 Add Device by IP Address or Domain Name
When you know the IP address or domain name of the device to add, you can add devices to the
client by specifying the IP address (or domain name), user name, password, and other related
parameters.
Steps
1. Enter Device Management module.
2. Optional: Click
on the right of
Device Management
and select
Device
.
The added devices are displayed in the list.
3. Click
Add
to open the Add window.
4. Select
IP/Domain
as the adding mode.
5. Enter the required information, including name, address, port number, user name, and
password.
Name
Create a descriptive name for the device. For example, you can use a name that can show the
location or feature of the device.
Address
The IP address or domain name of the device.
Summary of Contents for VIS-3013
Page 2: ......
Page 21: ...Fingerprint Access Control Terminal User Manual 7 Figure 4 1 Terminal Diagram...
Page 156: ......
