Disclaimer:
VISIONIS reserve the right to go ahead with any modifications of models or features or price without forewarning. All the
information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the
improper installation of this kit. If you are not handy with electrical equipment you should contact a professional electrician. You will also
need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for
any damage or fees that can occur.
www.visionistech.com
sales@visionistech.com
Technology Within Your Reach
The VIS-7102 kit comes with an indoor no touch infrared
request to exit button and a transmitter (remote). The exit
button has a built-in 433MHz wireless receiver that allows to
open the door using the transmitter. It also comes with an
LED Light that shows a blue color light when the button is in
standby mode and a green light when the button is active.
With this No Touch Exit Button, you no longer have to
physically push a button to exit. All you have to do is wave
your hand and the door will open. This no touch exit button
also includes a delay feature to up to 30 seconds.
The VISIONIS Request-to Exit Buttons may be connected to
the request-to-exit input of any access control device or
directly connected to an electromagnetic lock or electric
strike device.
SPECIFICATIONS EXIT BUTTON
Power:
DC12/24V
Output Contact:
NO/NC/COM
Time Delay:
0~30s (Adjustable)
Sensitive Distance:
5-20cm (1.97-7.87in.) - Adjustable
Communication Distance with Remote:
20 Meters
(65 feet)
Compatible Transmitter:
VIS-8017
LED Indicator:
Blue LED (Standby) // Green LED (Active)
Mechanical Life:
500,000 Tested
Mounting Way:
Surface Mount
Material:
ABS
Operating Humidity:
0-95% (relative humidity)
Operating Temperature:
-20°C ~ +55°C (-4°F - 131°F)
Weight:
0.094kg
VIS-7102
ref.
INSTALLATION MANUAL
Blue LED
(Standby)
Green LED
(Active)
Rear
View
IMPORTANT:
The no touch request to exit button is NOT COMPATIBLE with the VIS-8004 transmitter, it will only work
with the VIS-8017.
Indoor ABS No Touch Infrared Request To Exit
Button With Time Delay + Built-in 433MHz
Wireless Re 2-Button 433MHz
Transmitter (Remote) Kit
VIS-8017
Board
Transmitter
(VIS-8017)
Exit Button (VIS-7101)
