background image

 

User Manual

 

COPYRIGHT © Visionis Technology.  
ALL RIGHTS RESERVED. 
Any  and  all  information,  including,  among  others,  wordings,  pictures,  graphs  are  the  properties  of 
Visionis  Technology 

or  its  subsidiaries  (hereinafter  referred  to  be  “Visionis”).  This  user  manual 

(hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, 
partially or wholly, by any means, without the prior written permission of Visionis. Unless otherwise 
stipulated, Visionis does not make any warranties, guarantees or representations, express or implied, 
regarding to the Manual. 

 
About this Manual

 

The Manual includes instructions for using and managing the product. Pictures, charts, images and 
all other information hereinafter are for description and explanation only. The information contained 
in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please 
find the latest version in the company website (http://www.visionistech.com).  
Please use this user manual under the guidance of professionals. 
 

Trademarks Acknowledgement 

  and  other 

Visionis’  trademarks  and  logos  are  the  properties  of  Visionis  in  various 

jurisdictions.  Other  trademarks  and  logos  mentioned  below  are  the  properties  of  their  respective 
owners. 
 

Legal Disclaimer 

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, 

WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS 

AND ERRORS, AND VISIONIS MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING 

WITHOUT  LIMITATION,  MERCHANTABILITY,  SATISFACTORY  QUALITY,  FITNESS  FOR  A 

PARTICULAR  PURPOSE,  AND  NON-INFRINGEMENT  OF  THIRD  PARTY.  IN  NO  EVENT  WILL 

VISIONIS, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR 

ANY  SPECIAL,  CONSEQUENTIAL,  INCIDENTAL,  OR  INDIRECT  DAMAGES,  INCLUDING, 

AMONG 

OTHERS, 

DAMAGES 

FOR 

LOSS 

OF 

BUSINESS 

PROFITS, 

BUSINESS 

INTERRUPTION,OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE 

OF THIS PRODUCT, EVEN IF VISIONIS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH 

DAMAGES. 

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE 

WHOLLY  AT  YOUR  OWN  RISKS.  VISIONIS  SHALL  NOT  TAKE  ANY  RESPONSIBILITES  FOR 

ABNORMAL  OPERATION,  PRIVACY  LEAKAGE  OR  OTHER  DAMAGES  RESULTING  FROM 

CYBER  ATTACK,  HACKER  ATTACK,  VIRUS  INSPECTION,  OR  OTHER  INTERNET  SECURITY 

RISKS; HOWEVER, VISIONIS WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.  

SURVEILLANCE  LAWS  VARY  BY  JURISDICTION.  PLEASE  CHECK  ALL  RELEVANT  LAWS  IN 

YOUR JURISDICTION  BEFORE  USING  THIS PRODUCT  IN ORDER  TO ENSURE THAT YOUR 

USE  CONFORMS  THE  APPLICABLE  LAW.  VISIONIS  SHALL  NOT  BE  LIABLE  IN  THE  EVENT 

THAT THIS PRODUCT IS USEDWITH ILLEGITIMATE PURPOSES.  

IN  THE  EVENT  OF  ANY  CONFLICTS  BETWEEN  THIS  MANUAL  AND  THE  APPLICABLE  LAW, 

THE LATER PREVAILS. 

Summary of Contents for VS-AXESS-4D-ETL-PCB


























Reviews: