DQ Technology, Inc. / VisionNet
Page 47
M605N User Manual Revision 3.1
Step 3: Configure the LAN for Public IPs
3.A
From the
“LAN”
page located in the left hand frameset under “
Advanced Setup”
IP Address:
Same as the WAN
IP Address
Subnet Mask:
255.255.255.248
(or appropriate)
Enable UPnP
Disabled
Enable IGMP
Snooping:
Disabled
Enable LAN Side
Firewall
Disabled
DHCP Server:
Enabled (Or
Disabled
depending)
Start IP Address:
Second Host IP
Address
End IP Address:
6
th
Host IP
Address
Subnet Mask:
255.255.255.248
DNS Servers
Enter primary and
Secondary
Leased Time (hour):
24
Reserve IP Address
Unnecessary
Configure Secondary
IP Address:
Unchecked
3.B
Once complete, select “Save/Reboot”
PLEASE NOTE THAT LAN DEVICES MUST BE REBOOT PRIOR TO OBTAINING NEW, PUBLIC, IP ADDRESSES
