DQ Technology, Inc. / VisionNet
Page 59
M605N User Manual Revision 3.1
Section 5.2 – Reserving an IP Address Within the DHCP Server
DEFINITION OF RESERVED IP
Some applications (Such as Port Triggering and DMZ Host) require a Static IP Address. Some devices, however, do not
support Static IP Addresses or are portable in nature.
These devices may be provided a Static IP Address via the DHCP Server. When a Reserved IP Address is specified, the
modem will consistently provide the same dynamic IP Address to the specified MAC Address. The Reserved IP Address will
not be assigned to any other LAN Devices.
Prior to Assigning the Reserved IP Address, you must determine the MAC Address of the target LAN Device. You may
copy the MAC Address from the ARP Table located within the Device Info Section of the GUI.
Step 1: Direct Your Browser to the LAN Configuration Page
1.A
Select the
“LAN”
tab located within the left-‐hand frameset.
Then, In the left-‐hand frameset,
select
“LAN IP Configuration”
1.B
Select
“Add Entries”
You will be re-‐directed to the
“DHCP Static IP Lease”
Page
Enter the MAC Address of the
intended LAN Host, and the IP
Address that you would like to
permanently allocate to that host.
1.C
Select
“Apply Save”