DQ Technology, Inc. / VisionNet
Page 83
M605N User Manual Revision 3.1
Section 9.2 – OverWrite Default Configuration
When to update the default configuration
:
ONLY UPDATE THE DEFAULT CONFIGURATION WITH APPROVAL FROM A SUPPORT MANAGER.
The VisionNet modem comes with a pre-‐configured default configuration. In the event that you would like to access the
original configuration, please ask the customer to hold the reset button for 5 seconds.
Behavior of the Default Configuration:
The default configuration is loaded to the running configuration when the customer holds the modem’s reset button for 5
seconds. It is also loaded to the running configuration when
“Restore Default”
is selected within the GUI.
Step 1: Access the GUI to find the Default Configuration Page
1.A
The “Update Default Configuration” page is hidden within the GUI to prevent un-‐authorized access.
The hidden URL is located at :
http://XXX.XXX.XXX.XXX/customer
main.html
Where
XXX.XXX.XXX.XXX
Is the IP address of the modem
(either local or remote)
1.B.1
You may select
“Backup Current Settings”
to save the running configuration as the default configuration
-‐ or -‐
1.B
Select
“Browse”
button and choose your file location via your browser’s upload tool.
Select the
“Update User Settings”
button