DQ Technology, Inc. / VisionNet
Page 95
M605N User Manual Revision 3.1
Section 10.2 – SSID CONFIGURATION
When to change the Wireless SSID
You may wish to broadcast a different network name than the one provided; change the broadcasting conventions; or alter the
services advertised by the BSSID.
Step 1: Direct Your Browser to the SSID Configuration Page
1.A
Select the
“Wireless”
tab located within the left-‐hand frameset.
Then, In the left-‐hand frameset,
select
“SSID”
1.B
Enter the new SSID Name
Enable
Wireless
Wireless should be enabled
Hide
Access
Point
The SSID Name will not be
broadcasted
Clients
Isolation
No direct WiFi to WiFi
connections
Disable
WMM
Advertise
This should be enabled.
Older devices may not support
this feature
Enable
WMF
This should be enabled; some
wireless devices will make
Multicast requests
SSID
THIS IS WHERE YOU DEFINE THE
SSID NAME
BSSID
No modification – this is the
MAC Address that is advertised
Country
United States is the support
module
Max
Clients
Limits the amount of devices
that can connect
1.C Guest / Virtual SSIDs
1.C
Select the
“Save/Apply”
Button.