DQ Technology, Inc. / VisionNet
Page 97
M605N User Manual Revision 3.1
Section 10.4– GLOBAL SETTINGS
When to change the GLOBAL SETTINGS
Some devices offer very specific support for Wireless. Listed below are the items that may be changed; along with VisionNet
suggested settings
Step 1: Direct Your Browser to the Global Settings Page
1.A
Select the
“Wireless”
tab located within the left-‐hand frameset.
Then, In the left-‐hand frameset,
select
“Global Settings”
1.B
Under “Wireless -‐ Advanced”
BAND
2.4Ghz is the only band
supported
Channel
This is selected based
upon the network
environment
Auto Channel
Timer
If the wireless channel is
set to Auto, you must
specify the timeout-‐
Devices will be
disconnected during a
channel change
Bandwidth
All devices support
20Mhz
Only some devices
support 40 Mhz
20 Mhz is therefore
preferrable
Control
Sidebar
40Mhz operation uses
two channels – the
second channel is related
to the primary channel