VisionTrack FLEET FOCUS FF1000 User Manual Download

Page: 6 / 21

FUNCTIONS

G‐Sensor Calibration
1. Install the unit and park the vehicle on a flat surface .

2. Turn on the unit and press the blue button one time.

3. Then calibration will be done with “beep” sound.

Built‐in power backup (Super Capacitor)
When power to the unit is interrupted,

1000 creates the last

file using the internal Super Capacitor.

Time and Date

There are no time and date settings as the

1000 gets this information from the

GPS satellites.

SD Memory Card Format
Please format [initialize] the SD card using the PC viewer software.

Power off vehicle and take out SD memory card
Turn off the power and then check the BLUE LED light. Once the LED light

is not on, you can now safely remove the SD memory card.

Take out and Insert SD memory card during power on

[SD un‐mount] Press the Blue button for 3 seconds and release it, then the Blue

LED will stay on all the time. Now you can take out the SD memory card.

[SD reset] Press the Blue button for 3 seconds and release it after inserting the

SD card, then the

1000 will reboot.

There are 2 ways to remove the SD card, the first requires the vehicle to be powered

down and the second you can safely remove the SD with the vehicle is powered on.

Please see below details for both methods.

Safely Removal SD Card

Status

BLUE LED

RED LED

BUZZER

Booting

off

Upgrade

heartbeat

off

Continuous recording

4sec / 1sec

off

Triggered

Event recording

0.5sec on/off

off

100msec on

SD fault

off

0.5 sec on/off

off

System fault

off

SD umount

off

0.1sec on 2 times

SD reset

off

0.1sec on 2 times

SD Full

off

2sec / 2sec

off

G‐Sensor calibration

‐

0.1sec on 1 time

Parking Mode

8sec / 1sec

off

Power off

off

BLUE LED (RECORD)
The blue LED shows the power is on.

During the continuous recording: blue LED will be on 4seconds and off 1second.

During the event recording: blue LED will be on 0.5 second and off 0.5 second.

During the Parking mode: blue LED will be on 8seconds and off 1second.

RED LED (Warning LED)
The red LED will be turned on when system failure.
Buzzer
A ‘Beep’ sound will occur when event recording starts (this can be turned off, if

required by uncheck “Event Beep” at Settings)

LEDs & BUZZER Specification

LEDS & BUZZER SPECIFICATION

FUNCTIONS

Summary of Contents for FLEET FOCUS FF1000






















Search results

Summary of Contents for FLEET FOCUS FF1000

Reviews:

Related manuals for FLEET FOCUS FF1000

Brands by name

Popular brands

VisionTrack FLEET FOCUS FF1000, User Manual

Search results

Summary of Contents for FLEET FOCUS FF1000

Reviews:

Related manuals for FLEET FOCUS FF1000

Brands by name

Popular brands