3-6 Operating the PTX-PRO
PTX-PRO User and Technical Manual
3.5.5
Modifying Preset Parameters
To modify a preset, select a preset from the drop down box in the Preset Operations area on the
Main tab of the
MRC Radio Configurator
and click
Load Preset
. The PTX-PRO loads the
current values of that preset. Click on the tabs to modify various categories of parameters. Each
tab is described in the following sections.
Radio Mode Tab
You can set the radio mode parameters for each preset.
Load Page from Radio
—To load parameters for this page from the PTX-PRO, click on this
button.
Program Page to Radio
—To apply parameter modifications to the PTX-PRO, click on this
button.
Field
Options
Preset Name
Displays the name of the preset.
Operation Mode
Select
CODFM, ASI IN
,
Ext. IF In
,
Analog IF out
, or
LMS-T
.
Color Bars
Where applicable, select
ON
or
OFF
. LMS-T also has
Auto
and
Standby
options.
IF/CW Tone
Where applicable, select
ON
or
OFF
.
Remember Last
PA State
Check this box to load these values the next time you use the configurator.
