UltraDecoder Operators Manual
Menu Navigation
Issue : 3 (23/12/2015)
25
Ref : ULTD-ASUM-7001
Copyright © Vislink plc
8.3.1.1.1.
Preset
This item allows for one of the sixteen presets to be selected for recall.
8.3.1.1.2.
Name
This item will display the descriptive name associated with the selected Preset (if assigned).
8.3.1.1.3.
Recall
This option provides the facility to recall the settings associated with the selected Preset and assign
to the unit’s configuration.
To perform the recall, select this item for editing, change the value to Yes and press the Enter
button. The display will then change requesting confirmation of the action, at which point press
Enter again to confirm, or Escape to cancel.
8.3.1.2.
S
TORE
T
O
M
EMORY
This menu provides the facility to save the current unit configuration to its internal memory.
8.3.1.2.1.
Preset
This item allows for one of the sixteen presets to be selected to store the configuration to.
8.3.1.2.2.
Name
This item allows for a descriptive name to be assigned to the selected Preset.
Note that the name will only be saved if the preset is saved to memory using the Store option.
8.3.1.2.3.
Store
This option provides the facility to store the current unit settings to the selected Preset.
To perform the store, select this item for editing, change the value to Yes and press the Enter
button. The display will then change requesting confirmation of the action, at which point press
Enter again to confirm, or Escape to cancel.
8.3.1.3.
USB
T
RANSFER
This menu provides the facility to upload from or download presets to a USB memory stick.
8.3.1.3.1.
Recall
This option provides the facility to load preset information from a previously saved file.
Note that using this function will overwrite all the current presets stored in the unit (even if the file
only contains a subset of preset information).
To perform the recall, first ensure that a USB memory stick is inserted into the USB connector on the
front panel with the desired configuration.txt file, then select this item for editing, change the value
to Yes and press the Enter button. The display will then change requesting confirmation of the
action, at which point press Enter again to confirm, or Escape to cancel.
