Barcode reader VB34
Software configuration
Da
te
of
issue
06/
1
3
/2005
55
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group • Tel.: G49 621 776-0 • USA +1 330 4253555 • Sin65 67799091 • Internet http://www.pepperl-fuchs.com
7.2
Hints on quick configuration
7.2.1
Assistant for quickly setting up the reader
After installing the configuration software (Chapter 7.1) the system displays the
following window in which the user can select the desired configuration type:
Figure 7.1
Start window for configuration program
Less experienced users should select the option "Wizard", where an Assistant will
guide you step by step through the configuration of the reader. The following
parameters must be defined:
• Selection and definition of the barcodes
• Selection and definition of the operating mode (for more information, see the follow-
ing sections)
• Configuration of the digital inputs/outputs
• Selection of the hardware interface
• Configuration of the data output format
After the parameters have been defined, the system displays the following window for
completing the configuration of the reader with the following options:
• Save configuration on disk
• Change to enhanced configuration
• Send configuration to the reader