background image

 

www.visonic.com

 

Page 11 of 11 

D-306783 ioXpander-12x4 Module  (Rev 2, 11/17)

 

 

8.

 

Compliance with Standards & Warranty 

T hi s  d e vi c e  c om pli e s  wi t h  EN   5 0 1 3 1 - 3   G ra d e   2 ,  C l as s  I I  

 

 

 

 

Visonic  Limited  (the  “

Manufacturer

")  warrants  this  product  only  (the 

"

Product

") to the original purchaser only (the 

“Purchaser”) against defective 

workmanship and materials under normal use of the Product for a period of 

twelve (12) months from the date of shipment by the Manufacturer. 

This  Warranty  is  absolutely  conditional  upon  the  Product  having  been 

properly installed, maintained and operated under conditions of normal use 

in  accordance  with  the  Manufacturers  recommended  installation  and 

operation instructions.  Products which have become defective for any other 

reason,  according  to  the  Manufacturers  discretion,  such  as  improper 

installation,  failure  to  follow  recommended  installation  and  operational 

instructions,  neglect,  willful  damage,  misuse  or  vandalism,  accidental 

damage,  alteration  or  tampering,  or  repair  by  anyone  other  than  the 

manufacturer, are not covered by this Warranty. 

There is absolutely no warranty on software, and all software products are 

sold  as  a  user  license  under  the  terms  of  the  software  license  agreement 

included with such Product." 

The  Manufacturer  does  not  represent  that  this  Product  may  not  be 

compromised and/or circumvented or that the Product will prevent any death 

and/or  personal  injury  and/or  damage    to  property  resulting  from  burglary, 

robbery,  fire  or  otherwise,  or  that  the  Product  will  in  all  cases  provide 

adequate  warning  or  protection.      The  Product,  properly  installed  and 

maintained, only reduces the risk of such events without warning and it is not 

a guarantee or insurance that such events will not occur. 

Conditions to Void Warranty 

:  This warranty applies only to defects in parts and workmanship relating to 

normal use of the Products.  It does not cover: 

  damage incurred in shipping or handling; 

  damage  caused  by  disaster  such  as  fire,  flood,  wind,  earthquake  or 

lightning; 

  damage due to causes beyond the control of the Seller such as excessive 

voltage, mechanical shock or water damage; 

  damage caused by unauthorized attachment, alterations, modifications or 

foreign objects being used with or in conjunction with the Products;

 

  damage caused by peripherals (unless such peripherals were supplied by 

the Seller; 

  defects caused by failure to provide a suitable installation environment for 

the products; 

  damage caused by use of the Products for purposes other than those for 

which they were designed; 

  damage from improper maintenance; 

  damage  arising  out  of  any  other  abuse,  mishandling  or  improper 

application of the Products. 

   

Items Not Covered by Warranty

In addition to the items which void the Warranty, the following items shall not 

be covered by Warranty: (i) freight cost to the repair centre; (ii) customs fees, 

taxes, or VAT that may be due; (iii)  Products which are not identified with the 

Seller's  product  label  and  lot  number  or  serial  number;  (iv)    Products 

disassembled  or  repaired  in  such  a  manner  as  to  adversely  affect 

performance or prevent adequate inspection or testing to verify any warranty 

claim.  Access cards or tags returned for replacement under warranty will be 

credited or replaced at the Seller's option. 

 

THIS  WARRANTY  IS  EXCLUSIVE  AND  EXPRESSLY  IN  LIEU  OF  ALL  OTHER 
WARRANTIES,  OBLIGATIONS  OR  LIABILITIES,  WHETHER  WRITTEN,  ORAL, 
EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A  PARTICULAR  PURPOSE, OR OTHERWISE.   IN  NO CASE SHALL 
THE  MANUFACTURER  BE  LIABLE  TO  ANYONE  FOR  ANY  CONSEQUENTIAL  OR 
INCIDENTAL  DAMAGES  FOR  BREACH  OF  THIS  WARRANTY  OR  ANY  OTHER 
WARRANTIES WHATSOEVER, AS AFORESAID. 
THE  MANUFACTURER  SHALL  IN  NO  EVENT  BE  LIABLE  FOR  ANY  SPECIAL, 
INDIRECT,  INCIDENTAL,  CONSEQUENTIAL  OR  PUNITIVE  DAMAGES  OR  FOR 
LOSS, DAMAGE, OR EXPENSE,  INCLUDING LOSS OF USE,  PROFITS, REVENUE, 

OR GOODWILL, DIRECTLY OR INDIRECTLY ARISING FROM PURCHASER’S USE 
OR  INABILITY  TO  USE  THE  PRODUCT,  OR  FOR  LOSS  OR  DESTRUCTION  OF 
OTHER PROPERTY OR FROM ANY OTHER CAUSE, EVEN IF MANUFACTURER HAS 
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
THE MANUFACTURER SHALL HAVE NO LIABILITY FOR ANY DEATH, PERSONAL 
AND/OR  BODILY  INJURY  AND/OR  DAMAGE  TO  PROPERTY  OR  OTHER  LOSS 
WHETHER  DIRECT,  INDIRECT,  INCIDENTAL,  CONSEQUENTIAL  OR  OTHERWISE, 
BASED ON A CLAIM THAT THE PRODUCT FAILED TO FUNCTION. 

HOWEVER, IF 

THE  MANUFACTURER  IS  HELD  LIABLE,  WHETHER  DIRECTLY  OR  INDIRECTLY, 
FOR  ANY  LOSS  OR  DAMAGE  ARISING  UNDER  THIS  LIMITED  WARRANTY,

  THE 

MANUFACTURER'S  MAXIMUM  LIABILITY  (IF  ANY)  SHALL  NOT  IN  ANY  CASE 
EXCEED THE PURCHASE PRICE OF THE PRODUCT INVOLVED, 

WHICH SHALL BE 

FIXED AS LIQUIDATED DAMAGES AND NOT AS A PENALTY, AND SHALL BE THE 
COMPLETE AND EXCLUSIVE REMEDY AGAINST THE MANUFACTURER.

   

When accepting the delivery of the Product, the Purchaser agrees to the said 

conditions of sale and warranty and he recognizes having been informed of. 

Some  jurisdictions  do  not  allow  the  exclusion  or  limitation  of  incidental  or 

consequential  damages,  so  these  limitations  may  not  apply  under  certain 

circumstances.  

 

  

 

The  Manufacturer  shall  be  under  no  liability  whatsoever  arising  out  of  the 

corruption  and/or  malfunctioning  of  any  telecommunication  or  electronic 

equipment or any programs. 

The Manufacturers obligations under this Warranty are limited solely to repair 

and/or replace at the Manufacturer’s discretion any Product or part thereof 

that may prove defective.  Any repair and/or replacement shall not extend the 

original  Warranty  period.  The  Manufacturer  shall  not  be  responsible  for 

dismantling and/or reinstallation costs.  To exercise this Warranty the Product 

must be returned to the Manufacturer freight pre-paid and insured.  All freight 

and  insurance  costs  are  the  responsibility  of  the  Purchaser  and  are  not 

included in this Warranty. 

For sales in Israel only: 

The  Purchaser  shall  comply  with  the  provisions  of  the  Israeli  Consumer 

Protection  Law 

–  1981("Consumer  Protection  Law")  related  regulations, 

including  the  Israeli  Consumer  Protection  Regulations  (Warranty  Sticker), 

5772-2012)    ("Regulations"),    including,  without  limitation  (i)  providing  its 

customers  with  at  least  the  minimum  warranty  required  by  the  Consumer 

Protection Law, and (ii) ensuring that a warranty certificate  and a warranty 

sticker (as defined in the Regulations) ("Warranty Sticker") shall be attached 

to any sold Products and the date of the sale of the Product to the consumer 

or the end-user shall be added in a readable manner on the Warranty Sticker. 

In no event shall the Purchser’s compliance with the Consumer Protection 

Law and Regulations expand any of the Manufacturer's warranty obligations 

under this warranty, and the Purchaser shall be responsible for any warranty 

that it provides with respect to the Products which exceeds or is different from 

this warranty. 

This  warranty  shall  not  be  modified,  varied  or  extended,  and  the 

Manufacturer  does  not  authorize  any  person  to  act  on  its  behalf  in  the 

modification, variation or extension of this warranty. This warranty shall apply 

to the Product only.  All products, accessories or attachments of others used 

in conjunction with the Product, including batteries, shall be covered solely 

by their own warranty, if any.  The Manufacturer shall not be liable for any 

damage  or  loss  whatsoever,  whether  directly,  indirectly,  incidentally, 

consequentially or otherwise, caused by the malfunction of the Product due 

to products, accessories, or attachments of others, including batteries, used 

in  conjunction  with  the  Products.  This  Warranty  is  exclusive  to  the  original 

Purchaser and is not assignable. 

This  Warranty  is  in  addition  to  and  does  not  affect  your  legal  rights.  Any 

provision in this warranty which is contrary to the Law in the state or country 

were the Product is supplied shall not apply. 

 

Governing Law

This  disclaimer  of  warranties  and  limited  warranty  are  governed  by  the 

domestic laws of Israel. 

 

Warning 

The  user 

must  follow  the  Manufacturer’s  installation  and  operational 

instructions including testing the Product and its whole system at least once 

a  week  and  to  take  all  necessary  precautions  for  his/her  safety  and  the 

protection of his/her property. 
*    In  case  of  a  conflict,  contradiction  or  interpretation  between  the  English 

version  of  the  warranty  and  other  versions,  the  English  version  shall 
prevail. 

 

 
 

 

Summary of Contents for ioXpander












Reviews: