SECURING THE PROTECTED SITE
DE5467U
9
Switching from ‘AWAY’ to ‘HOME’
Do not disarm the system - just press
.
Since
this operation reduces the security level, the
P will ask you to key in your master user
code or user code, thus making sure that you are an
authorized user.
PRESS RESULTANT
DISPLAY
ENTER CODE
_ _ _
ARMING HOME
↓
(Exit delay)
↓
[Enter code]
Move to
interior zone
ARM HOME HH:HH
ARM indicator
flashes during the armed state.
If an alarm occurred while the system was armed in
the AWAY mode, the display will respond differently:
PRESS RESULTANT
DISPLAY
ENTER CODE
_ _ _
[Enter code]
ARMING HOME
↓
(Exit delay)
↓
Move to
interior zone
HOME HH:HH
(alternating)
ARM HOME MEMORY
ARM
flashes during the armed state.
Arming ‘Instant’
You may arm AWAY or HOME without an entry
delay - any detection in any zone will trigger an
immediate alarm.
If you wish to arm AWAY-INSTANT, proceed as
follows.
PRESS RESULTANT
DISPLAY
ARMING AWAY
ARMING INSTANT
(alternating)
PLEASE EXIT NOW
↓
(Exit delay)
↓
Vacate the
premises
AWAY
ARM
lights during the armed state.
If you wish to arm HOME-INSTANT, proceed as follows:
PRESS RESULTANT
DISPLAY
ARMING HOME
ARMING INSTANT
(alternating)
ARMING HOME
↓
(Exit delay)
↓
ARM HOME HH:HH
(alternating)
Go to an
internal zone
ARM HOME INSTANT
ARM indicator
flashes during the armed state.
Forced Arming
(Not to be used in UL- listed systems)
Forced arming allows you to arm the system even
though one zone or several zones are disturbed, and
the NOT READY message is displayed.
Automatic forced arming only works if the installer
allowed this option while programming your system.
Disturbed zones will be bypassed - they will not be
armed.
The protected site will not have maximum
protection
.
Note:
When forced arming is carried out, the buzzer
“protests” by emitting a continuous tone during the exit
delay until the last 10 seconds of the delay. You can
silence this signal by pressing the arming button again.
When NOT READY is displayed, Forced arming
“AWAY” is performed as follows:
PRESS RESULTANT
DISPLAY
ARMING AWAY
↓
PLEASE
EXIT
NOW
↓
(Exit delay)
↓
(to
mute the
AWAY
buzzer)
ARM
lights during the armed state.
When NOT READY is displayed, Forced arming
“HOME” is performed as follows:
PRESS RESULTANT
DISPLAY
ARMING HOME
↓
(Exit delay)
↓
HOME HH:HH
(To
mute the buzzer)
Go to an interior
zone
ARM indicator
flashes during the armed state.
