USER SETTINGS
DE5467U
27
SUNDAY
NEXT
NEXT
NEXT
WEDNESDAY
NEXT
NEXT
NEXT
NEXT
FRIDAY
DAILY
SET TIME&FORMAT
NEXT
SET DATE&FORMAT
device number (2-digit)
SCHEDULER
OK
OK
NEXT
DEVICE No.
OK
OK
OK
OK
NEXT
OPERATION No. 1
OK
NEXT
OPERATION No. 2
OK
NEXT
OPERATION No. 3
OK
NEXT
OPERATION No. 4
OK
start - HH:MM
stop - HH:MM
BACK
or
NEXT
TIME - - / - -
(enter start/stop time)
OK
MONDAY
OK
TUESDAY
OK
THURSDAY
OK
NEXT
SATURDAY
OK
Moving forward
Moving backward
Moving one level
up in the menu
Return to
“<OK> TO EXIT”
NEXT
To move within most of
the menus, the following
keys can be used:
SHOW / OK
Show / confirm
data
Black box is displayed
regarding 2-way X-10 unit
If you enter “00” and
press OK, PGM is displayed
Notes
1. Select time in 10 minute interval only.
2. To erase a displayed time, press OFF.
(See figure 8)
OK
OK
Figure 8 DETAIL "A"
- Scheduler Function
Enrolling Keyfob Transmitters
Keyfob transmitters are multi-button wireless units of
the CodeSecure™ type. Eight system users carry
keyfob transmitters to exercise better, quicker and
safer system functions control. Your control panel
must recognize the unique identification code (ID) of
each such keyfob to respond to commands
transmitted by them.
Note:
For UL installations where the model MCT-
234 keyfob is used, the voice/speaker on the
P shall be enabled.
Before anything else, gather up all keyfob units you
intend to enroll, and make sure they all have
batteries installed.
Keyfob transmitter enrolling involves the following
steps:
A.
Having entered your Master User Code
successfully (see above - Entering the User
Settings Menu), Click the NEXT button
(repeatedly, if necessary) until the display will
read:
ENROLL KEYFOB
B.
Click <
OK
>. The display will read:
KEYFOB No: _
C.
Suppose that the Keyfob you are about to enroll
is to be designated as Keyfob No. 5. Assuming
that memory location No. 5 is free - no keyfob has
yet been enrolled to it - click the <
5
> key. The
display will change to:
KEYFOB No: 5
The clear space at the far right tells you that the
memory location is free.
D.
Click <
OK
>. The display will prompt you to initiate
a transmission from the chosen keyfob:
TRANSMIT NOW
E.
Initiate a transmission from the chosen keyfob by
pressing any one of its pushbuttons. In response,
the “Happy Tune” (- - - –––) will sound and the
display will change to:
KEYFOB No: 5
A dark box will appear at the far right, indicating
that the chosen Keyfob has been enrolled as
Keyfob No. 5.
Note:
If the same keyfob is already enrolled
elsewhere, the “Happy Tune” will sound twice in
succession.
F.
From this point on, you may continue in several
different directions:
•
If you wish to enroll another keyfob, select
the desired number by:
-
- Clicking
<
NEXT
> to go up (6 7 8.....)
- Clicking <
BACK
> to go down (4 3 2.....)
- Clicking
<
HOME
> <keyfob #>.
•
To return to the main menu, click <
AWAY
>.
This will bring back the display:
<OK> TO EXIT
You may now review and select any other mode on
the User menu (by clicking <
NEXT
> or <
BACK
>).
