5
Invisible 3
22
122
150
150
Empfehlung: Leiste zur
Abstützung der untersten
Paneelprofilkante
A
Senkschraube M5 x 30 mm
B
Flachkopfschraube 4 x 5 mm
19
(16)
13.5
Empfehlung:
Alle Befestigungspunkte nutzen,
d.h. alle 150 mm verschrauben
B
Empfehlung: mind. alle
300 mm verschrauben
A
22.4
66.7
33.3
66.7
1/2019 (EN)
1/2019 (EN)
EN
Assembly instructions Invisible 3 profile panels one-sided
The following steps must be carried out when
assembling a one-sided profile:
1. Screw the lowest profile to the wooden panel
(min. 16 mm) from the front using a 4 x 15 mm
screw and from the rear using a M5 x 20 mm
screw.
2. Insert a profile into the top of the bottom pro-
file - making sure that the profile is correctly
locked into place - and screw to the wooden
panel with 4 x 15 mm screw.
3. Insert Invisible 3 end profile - making sure
that the profile is securely locked in place.
4. Screw frame to support panel.
Frame
A
Countersunk screw M5 x 30 mm
B
Pan-head screw 4 x 5 mm
Assembly instructions Invisible 3 profile panels double-sided
The following steps must be carried out when assembling
a two-sided profile:
1. Connect double-sided Invisible 3 profile panels to one
another - making sure that each profile is securely
locked in place.
2. Fit the end profile at the top - making sure that it is
securely locked in place.
3. Popular frame solutions (e.g. wood) are to be screwed
to the Invisible 3 profiles with M5 screws from the side.
Recommendation:
fit screw at least every
300 mm
Recommendation:
use all fixation points, i.e. fit
screw every 150 mm
Recommendation:
bar to support bottom
profile edge
