6
Upper Hinge
Cover
Lower
Hinge Cover
Hinge screws
to be loosened
Hinge
screws to be
loosened
Pre-Installation
LID REMOVAL
If it is necessary to remove the lid, follow these steps:
1. Remove each upper hinge cover by grasping on the sides and pulling upwards. Remove each lower hinge cover by grasping on the
sides and pulling down.
2. Open the lid to the maximum position. (The hinges are loosest at this position.)
3. Loosen, do not remove, the 4 screws from the lower part of the hinge that are mounted to the cabinet.
4. Raise/lift the lid until the screws align with the larger slotted openings in the bottom of the hinge. Each hinge is still attached to the lid
with 3 screws.
5. To reinstall the lid follow the steps in reverse. Tighten all the hinge screws but avoid over-tightening to prevent stripping. Reinstall the
hinge covers.
CAUTION:
LIfting Hazard
The lid is heavy. Use both hands to secure the lid before lifting.
CAUTION:
The hinge spring is under tension.
