0150-0202G
30
Vista Columbus Triplex
q
Main Menu
→
Time/Date
→
Network Time Setup
Use this menu to enable/disable and specify how often time synchronization should occur between the
Triplex and the Network Server. The Region /Time Zone must be setup prior to enabling the option.
Update Interval,
Select from: Enable, Disable, Once per Day, Twice per Day, and Once per Hour
NTP Primary Server:
Enter IP Address of Primary Server.
NTP Backup Server:
Enter IP Address of Backup Server.
1. To save changes and exit the menu: Select
[OK]
, then press the
Enter
button.
2. To exit the menu without making changes: Press the
Menu
button, or select
[CANCEL]
, and then
press the
Enter
button.
Network Time Protocol Setup
Last Update: Never Since Power-up
Warning: Region/Time Zone must be set correctly!
Update Interval :
NTP Primary Server : 3. 37. 8. 26
NTP Backup Server : 0. 0. 0. 0
DISABLE
[CANCEL] [OK]
3.9 Record
Use this menu to:
•
Specify a schedule for recording.
•
Specify if a camera is to be used for event recording,
time-lapse recording, or both.
•
Specify the record quality: High, Medium, or Standard.
•
Specify the time-lapse record rate per camera.
•
Specify the event record rate per camera.
•
Specify the activity record rate per camera.
•
Specify the global alarm record rate per camera.
•
Specify the Alarm/Event actions.
•
Perform disk maintenance by performing a Disk Test,
Deleting, Un-deleting, or Destroying previously recorded
video.
•
Turn the Record Lock feature ON or OFF.
•
Turn the Automatic Delete Mode ON or OFF.
Record Quality
Event/Timelapse
Timelapse Record Rate
Event Record Rate
Activity Record Rate
Alarm Record Rate
Alarm/Event Actions
Disk Maintenance
Record Lock
Auto Delete Mode
Record Timer
Summary of Contents for Columbus Triplex
Page 80: ...0150 0202G...
