Removing and Adding Channels
Channels can be removed from the remote if not all 14 are needed. They can also be added back to the remote once removed.
Follow these steps to remove or add channels from your remote.
For more in depth motorization programming instructions, please visit vistaproducts.com/guides
1. Press and hold the UP and DOWN buttons at the same time.
The display will flash the current maximum number of channels.
Release the buttons.
3. Once the desired amount of channels is set,
press and hold the RAIL SELECTOR and
CHANNEL buttons until the display stops
flashing to confirm your choice.
2. Once the buttons have been released, use the
UP and DOWN buttons to select the amount of
channels you would like on the remote.
11/18
K2188
