6 CHANNEL TIMER REMOTE
|
Simplicity
Rechargeable Motorization
Quick Start Guide
Your shade has come pre-programmed from the factory. Follow these easy steps to get started.
2. Your shade is now ready! Press the CLOCK button until the
display shows ‘Manual’. Select the programmed channel and use
the UP and DOWN arrows to operate the shade.
For more in depth motorization programming instructions, please visit vistaproducts.com/guides
V
ista
Setting Time and Day
NOTE:
To turn the remote on, press the POWER button on the right side of the remote.
Make sure the remote is in ‘Manual’ mode. Press the CLOCK button until ‘Manual’ appears on the screen.
1. Push and hold the LIMIT button.
While holding the limit button, push the
CLOCK button for 3 seconds and release.
The hour digits will flash.
2. Use the UP and DOWN buttons to set the
current hour. Press the CHANNEL button to
confirm hour and advance to minutes.
NOTE
: Time is in 24 hour format.
3. Repeat step 2 for minutes and day.
Once time and day are set, hold the CLOCK
button for 3 seconds. Display will flash and
then display current time and day.
1. Mount the shade.
11/18
K2184
