background image

11 

3.5 Network Camera Setup 

 
This section describes how to configure the network camera, and is intended for product 
Administrators,

 

who have unrestricted access to all the Setup tools; and Operators, who have access 

to the settings for Basic, Live View, Video & Image, Audio, Event, and System Configuration. 
You can configure the network camera by clicking Setup

 

in the top right-hand corner of the Live View 

page. Click on this page to access the online help that explains the setup tools 
When accessing the Network Camera for the first time,   
the “Admin Password” dialog appears. Enter your admin 
name and password, set by the administrator. 
 
Note: If the password is lost, the Network Camera must 
be reset to the factory default settings. 
See “3.6 Resetting to the Factory Default Settings”. 

 
 
3.6 Resetting to the factory default settings 

To reset the Network Camera to the original factory settings, go to the Setup>System> Maintenance

 

web page (described in “3.5.5 System > Maintenance”) or use the Reset button (SW1) on the board of 
the dome camera, as described below: 

 
 
 
 
 
 
 
 
 
 
 
 
 
•    Using the Reset Button 

Follow the instructions below to reset the Network Camera to the factory default settings using 
the Reset button. 
 

   

1.    Power off the Network Camera by disconnecting the power adapter. 

   

2.    Open the top cover of camera. 

     

3.    Press and hold the Reset button (SW1) on the board with your finger while reconnecting   

 

 

the power. 

   

4.    Keep the Reset button (SW1) pressed during about 2 seconds. 

   

5.    Release the Reset button (SW1). 

 

6. 

The network 

camera

 resets to factory defaults and restarts after completing the factory reset. 

 

 

The unit now has the default IP address 192.168.30.220.

 

 

7. 

Close the top cover of camera. 

 

Caution:

 When performing a Factory Reset, you will lose any settings you have saved. 

 

3.7 More Information 

 
For more information, please see the 

User’s Manual, which is available on the CD supplied. 

Summary of Contents for VK2-3MPVRDIR3V9F













Reviews: