3
4
1.1 External View
Overall Introduction
Getting Started
Side
Top
Flash
LCD
Montior
LED
Wide/ Tele Button
Shutter Button
Power Button
USB
Connector
Tripod
Socket
Lens
Microphone
Strap Eyelet
Battery/
Memory Card/
Chamber Cover
1.2 Display
Information
2.1 Turn the Camera on/off
2.2 Incert the batteries
2.3 Insert/Remove Memory Card
2.4 Attaching Wrist Strap
1. Installing the batteries and memory card before starting.
2. Press the Power Button to turn on the camera.
3. Press the Power Button again to turn off the camera.
1. Power off the camera.
2. Slide the battery cover lock and hold it open while
sliding the cover.
3. Follow the polarity indications and insert two the batteries.
4. Close the Battery Cover.
The batteries may not work normally under 0 C or over 40 C.
o
o
The indication of the battery status.
(
): Battery power is full.
(
): Battery power is half drained.
(
): Battery power is drained. Replace with new batteries.
The batteries may run out if the batteries are kept inside the
camera for a long time without using. Please remove the
batteries when the camera is not in use.
1. Power off the camera.
2. Open the Battery Cover.
3. Insert the memory card into the card slot and press
it down until a click sound happens.
(Please press the memory card again to get it out
once a click sound happens.)
4. Close the Battery Cover.
Use the wrist strap to avoid dropping the camera during use.
999
8M
8:08 AM
2009/01/05
F3.5
1/30
X1.1
2
4
5
6
8
3
19
7
1
1. Working Mode
2. Battery Status
3. Shooting Mode
4. Flash mode
Single
Continuous
( ) AEB
Auto Flash
Auto Flash & Red-eye
Reduction
Fill-in Flash
( )Auto
( )Smart
( )Program
( )Portrait
( )Transform
( )Landscape
( )Night Portrait
( )Night Landscape
( )Sunset
( )BackLight
( )Fireworks
( )Candle Light
( )Beach
( )Auction
( )Movie Clip Mode
( )Voice Reording Mode
( ) Battery Full
( ) Battery Half Drained
( ) Battery Drained
( )
( )
( )
( )
( ) Slow Sync
( ) Flash Off
( ) 10 Seconds
( ) 2 Seconds
( ) Double
( ) Macro
( ) Multi
( ) Spot
( )
( ) Auto
( ) 100
( ) 200
( ) 400
( ) Auto
( ) Daylight
( ) Cloudy
5. Self-timer
6. Focus Range
7. Metering
11. ISO Value
12. White Balance
Memory Card Inserted
_
8. Memory Status
9. Time & Date
10. (
) E2EV
0.5EV/Steps
( ) Sunset
( ) Fluorescent
( ) Tungsten
( ) Custom
( ) Soft
( ) Normal
( ) Vivid
( ) Super Fine
( ) Fine
( ) Normal
x 2616
5
2592 x 1944
x 96
(720) 720 x 480
(640)
(320)
13. Sharpness
14. Image Quality
Movie Clip
16. Estimated Available
Shots & Video Time
(12M) 4032 x 3024
by interpolated
(9M) 3488
( M)
(1M) 1280
0
640 x 480
320 x 240
15. Image Size Still Image
17. F No. & Shutter Speed
18. Zoom Status Indicator
19. (
)Face Detection
2S
MENU
Play / Pause /
Up Button
Voice Memo /
Down Button
Menu Button
Self- timer /
Left Button
Flash /
Right Button
Delete/
Exposure Button
Back
Front
Mode Button
Playback Button
MENU
3.1 Power
3.2 Shutter
3.3 Tele/Wide
Press the Power Button to turn on the camera.
Pressing the Power Button again will turn the camera off.
If there is no operation during the specified time, the
camera will power off automatically.
The camera will focus automatically, and the indicator
will light green.
P
Push up the Tele Button, the Zoom Bar Indicator
appearing on the top side of the LCD Monitor and
it shows the current zoom status.
Push down the Wide Button, the Zoom Bar
Indicator will go back to the Wide view.
The camera allows maximum 3.0x optical zoom
and 5.0x digital zoom.
1.
.
.
Press the Shutter Button halfway.
2
3
ress the Shutter Button fully down to take the shot.
4. Since the shot is being taken while shutter sound
plays, be careful not to move the camera.
Buttons & Function
07 : 03 AM
2009/01/31
8M
4
X1.1
( 3.0X )
( 5.0X )
MENU
100
ISO
ISO
200
ISO
400
AUTO
ISO
15
10
11
12
13
14
16
18
9
17
Power
Shutter
