VITA-LIFE AcquaPhi Bedienungsanleitung
© VITA LIFE HandelsgmbH, TSC Europe
6
ENG
DEU
ACQUAPHI
6. Technische Daten und Zubehör
Bezeichnung
VITA-LIFE
AcquaPhi™
Verwendungszweck
„Dynamisierung“ (bzw. „Aktivierung“, „Strukturierung“)
von Trinkwasser*
Material Wellrohr ½”
Edelstahl AISI 304 (V2A) (Hersteller: Eurotis)
Optional: Edelstahl AISI 316 (V4A)* (Eurotis)
Gehäusematerial
Polystyrol
Max. Betriebsdruck
15 bar
Durchfluss bei 5 bar
circa 1.000 L/Std. (bei AISI 316 ca. 850 L./Std.)
Zulässige Wasser- und
Betriebstemperatur
Von 0,5°C bis 60°C
Höhe, Tiefe, Breite
max. 50 cm x 25 cm x 25 cm (inklusive Standfuß)
Leer-Gewicht
Ca. 3 kg (inklusive Standfuß)
Geeignet für
Trinkwasser*
*Aufgrund der erhöhten Korrosionsbeständigkeit der Edelstahlsorte 316L (V4A) kann
AcquaPhi™ mit diesem Wellrohre auch für Lebensmittel und industrielle Anwendungen
benutzt werden. Hierbei bitte die Kompatibilität gemäß dem folgenden Link der Rohrher-
stellers Eurotis überprüfen:
http://www.eurotis.it/IT/PRODOTTI/caratteristiche/tubi/compatibchi-
mica/index.html
Karteneinschub:
AcquaPhi™ hat im unteren Bereich einen Einschub zum Einschieben
einer Karte mit Abmessungen 42 x 30 mm, maximale Stärke 4 mm. In diesen Einschub kön-
nen beispielsweise im Handel erhältliche Karten mit darauf abgespeicherten Frequenzspekt-
ren eingefügt werden, um das Grundfrequenzspektrum von
AcquaPhi™ zu erweitern.
Materialen die zum individuellen Anschluss für den Anwendungsfall notwendig sind, (Schläu-
che, Verbindungsstücke, Wasserauslässe, etc.) können in der Regel in den Sanitärabteilungen
von Baumärken erworben werden.