DEU
ENG
VITA-LIFE AcquaPhi User Guide
© VITA LIFE HandelsgmbH, TSC Europe
21
Bei der Installation von
AcquaPhi™
sollte eine waagerechte Fläche zum
Aufstellen des Geräts benutzt werden
Connecting the Main Water Inlet Pipe to the device:
1. Close the gate-valve of the water supply.
2. Screw the ½-inch male-to-male nipple pipe to the inlet of the device (indicated by the
arrow INTO the device) by using one of the supplied gaskets.
3. Prepare the attachment of the pipe network, for connection with the ½ -inch nipple
pipe.
4. Connect the terminal to the nipple pipe using one of the supplied gaskets.
Connecting the Exit Pipe:
1. Connect the pipe to the ½-inch female nipple coming out from the device (indicated
by the arrow OUT of the device).
2. Open the gate-valve of the water supply.
3. After installation, open the faucet and allow the water to run for a precautionary
cleaning of the device’s pipes while simultaneously ensuring that the connections you
made are water-tight.
AcquaPhi™ is now ready for use.
Examples for installation and placement of
AcquaPhi™. (Connection accessories as shown are not included in delivery.)
