www.vitamobilitywerks.com
5
u
Modifications
VMW Medical Product has designed and engineered power scooters to provide maximum utility.
However, under no circumstances should you modify, add, remove, or disable any part or function of
your power scooter. Personal injury and damage to the power chair may result.
1.
Do not modify your power scooter in any way not authorized by VMW. Do not use accessories if
they have not been tested or approved for VMW products.
2.
Get to know the feel of your power scooter and its capabilities. VMW recommends that you
perform a safety check before each use to make sure your scooter operates safely.
u
Inspections prior to using your power scooter:
1.
If equipped with pneumatic tires, please check for proper tire inflations.
2.
Please check all electrical connections and make sure they are tight and not corroded.
3.
Please check all harness connections and make sure they are secured properly.
4.
Please check the brakes.
u
Weight limitation.
1.
Please refer to the specifications table for weight capacity information. Power scooter is rated for a
maximum weight capacity.
2.
Stay within the specified weight capacity for your scooter. Exceeding the weight capacity voids
your warranty. VMW will not be held responsible for injuries or property damage resulting from
failure to observe weight limitations.
3.
Don’t carry passengers on scooters. Carrying passengers on scooter may affect the center of
gravity, resulting in a tip or a fall.
u
Tire inflation
1.
If your scooter is equipped with pneumatic tires, it is necessary to check the air pressure at least
one time a week.
2.
Proper inflation pressures will prolong the life your tires and ensure the smooth operation while
riding.
3.
Do not under-inflate or over-inflate your tires. It is critically important that 30-25 psi (2-2.4bar)
tire pressure be maintained in pneumatic tires at all times.
4.
Inflating your tires from an unregulated air source could over-inflate them, resulting in a burs
tire.
