VITA - Vacumat 4000 Premium
39/03/04
Vita Zahnfabrik H.Rauter GmbH&Co.KG 79704 Bad Säckingen
12
7
Entering program – tabular mode
Calling up tabular mode when furnace is switched on
Confirm program group with the
OK
key – display shows program table.
Tabular mode offers the following possibilities:
•
Entering / changing the program names
•
Entering / altering the program parameters (except lift positions, see graphics mode)
•
Copying the program
•
Deleting the program
•
Changing to graphics mode
•
Changing to operation main menu
•
Starting
program
•
Stopping
program
7.1 Entering / altering the program names / parameters
Select the appropriate line with the
up/down
keys, the line selected is highlighted. With the
right/left
keys
the appropriate column is selected, the value or cursor is displayed in red in an empty column.
7.1.1
Entering / altering program names
•
Select column for program names
•
Press
the
Text
key, cursor indicates the position
•
Alphanumerical entries using the keypad
•
After entering, continue by pressing the cursor key
#
???
•
Store program names by pressing
OK
key
Program name is stored, and at the same time basic values are entered into the table.
7.1.2
Entering / altering program parameters
•
Select program line with
up/down
key (marked in colour)
•
Select program value with
left/right
key (marked in red)
•
Enter program parameters with the keypad, possible values are shown in the display with min/max.
•
Save by pressing key
#
for a single program run
or
•
Save permanently by pressing
OK
key.
7.2 Storing program parameters
A program parameter entered is stored with the
OK
key.
Attention!
If program parameters are confirmed with the # key, this is valid only for one program run, after
this the previous value reappears.
7.2.1 Copying
programs
•
Select an empty line
•
Press
Text
key
•
Enter program name – confirm single entry by pressing key
#
- save with
OK
key
•
Select required program with the
up/down
key
•
Press
Copy
key
•
Press
up/down
key to return to newly selected program
•
Insert program with
Paste
key
•
Save
with
OK
key
