VITA - Vacumat 4000 Premium
39/03/04
Vita Zahnfabrik H.Rauter GmbH&Co.KG 79704 Bad Säckingen
15
8.1.3
Entering / altering lift positions for pre-drying
•
Press key marked
Liftpos
– the value for position 1 is shown in red.
•
Select position with
up/down
key and enter the value
or
•
Press
the
right/left
keys to change from position to interval time and enter using keypad.
Possible entry values are shown in the display and the following settings are possible:
Pos. 1 = 0 – 30 %
time 0 – 120 sec.
Pos. 2 = max. 50 %
time 0 – 120 sec.
Pos. 3 = max. 80 %
remaining pre-drying time (is entered automatically)
In order to find the correct lift position it is possible after selecting the position (value is displayed in red) to
move the lift into the desired position by pressing the
Lift
key, and confirming the value with the
OK
key.
End with the key
Lift Pos
., lift moves into lower position
8.1.4 Selecting
pre-vacuum
In the case of a program with vacuum, the vacuum is built up in the firing chamber before the temperature
rise begins.
Activating the vacuum:
•
Press the key
Vor Vac
(pre-vacuum)
•
Enter time setting via the keyboard (max. 5 min)
•
Save with the
OK
key
Deactivating pre-vacuum.
•
Press
Vor Vac
key – field for pre-vacuum appears
•
Press
the
*
key – pre-vacuum is deleted.
8.1.5 Selecting
vacuum
•
Press
the
vacuum
key – field for vacuum appears
Basic settings for vacuum start, stop and vacuum level appear.
Start at the beginning of the temperature rise
Stop after the heating-up time is completed/the end temperature is reached
Vacuum level 100%
•
Press
Start
key (program starts)
or
•
Press
vacuum
key
If other values are required, (possible entry values are shown in the display)
•
press
right/left
key – the selected area is indicated in red
•
Enter value with keyboard
•
Save by pressing
OK
key
•
End by pressing
vacuum
key
The possible entry values appear in the display.
8.1.6
Deleting
vacuum
•
Press
vacuum
key
•
Press
*
key – vacuum is now deleted.
