Vital Baby NOURISH SCOOP, Manual

ASSEMBLY INSTRUCTIONS – HIGHCHAIR

Step 1

Insert the upper front legs (9) into 
the lower front legs (7), then insert 
the upper rear legs (10) into the 
lower rear legs (8). See figure 1. 
Make sure that the pins lock into 
place in the holes – you will hear a 
“click” when they are secure. 

Step 2

Insert the assembled legs into the 
chair, ensuring that the straight 
front legs slot into holes “A” and 
“B” at the front of the chair, and 
that the slightly curved rear legs 
slot into holes “C” and “D”. See 
figure 2. Make sure that the pins 
lock into place in the holes – you 
will hear a “click” when they are 
secure.

Step 3

Slide the table unit (3) in to place 
in the chair (see figure 3). You will 
hear a “click” when this is securely 
in place. Rotate the table to the 
eating position (see “ROTATING 
THE TABLE”) and slot the table 
tray (4) into place.

Step 4

Slot the footrest (5) into place in 
the pillar of the table. Make sure 
that the pin locks into place in the 
holes – you will hear a “click” when 
they are secure. See figure 4.

Step 5

Thread the harness through the 
slots in the chair cushion (2), 
ensuring that the cushion sits snug 
against the chair and no part of 
the harness is trapped behind the 
cushion. 

FIGURE 2

FIGURE 3

FIGURE 4

FIGURE 1

ASSEMBLED 

FRONT LEGS

ASSEMBLED 

BACK LEGS

A

B

D

C