Vital Baby NOURISH SCOOP, Manual

TRANSITIONING FROM HIGHCHAIR TO TODDLER CHAIR

Step 1

Ensure the highchair is in the 
open position with the tray 
pulled and rotated forward – 
SEE “ROTATING THE TABLE” 
and “ADJUSTING THE TABLE”. 
Then remove the footrest. Do this 
by pushing the pin that’s secured 
into the highchair on the back of 
the pillar, while simultaneously 
pulling the footrest downwards. 
See figure 5.

Step 2

Push the tray release button 
located on the underside of the 
chair (see figure 9) and slide the 
table unit out and away from the 
chair. Once the table has been 
removed, slot the chair cap (6) 
in to place in the chair - you will 
hear a “click” when it is secure. 
See figure 6. 

Step 3

De-thread the harness from the 
chair cushion and remove the 
cushion from the chair, before 
removing the harness straps from 
the chair. 

Step 4

Remove the legs from the 
highchair and disassemble. 
Then, replace the lower front 
legs and lower rear legs into the 
highchair. The longer front legs 
should be inserted into slots “A” 
and “B” and the shorter back 
legs should be inserted into slots 
“C” and “D”. See figure 2.

FIGURE 5

FIGURE 6