Vital by Sunbeam | 2400W STEAM IRON VSR400
Instruction manual
5
USING YOUR STEAM IRON CONTINUED
Using the shot of steam
The shot of steam can be used whether dry or steam ironing when the temperature dial is set to
any temperature above the two dot (••) setting.
1. Ensure the tank is at least ¼ full of water.
2. Select the desired temperature and wait until the thermostat light goes out.
3. Press the shot of steam button several times with the iron on the soleplate to prime the
pump.
NOTE:
If the tank has run dry, it may be necessary to re-prime the pump after filling the iron
with water.
Using the spray mist
The spray mist can be used whether dry or steam ironing to pre-dampen hard to iron fabrics.
1. Ensure the tank is at least ¼ full of water.
2. Press the spray button during ironing to release a fine mist from the spray nozzle.
