CARE AND CLEANING OF YOUR
STEAM IRON
After each use
1. Turn the power off and remove the plug from the power outlet.
2. Allow the iron to cool before winding the cord around the built-in cord wrap.
Storage
Always store the iron on its heel rest.
NOTE:
Do not store the iron with the soleplate facing down, or in the carton.
Cleaning
To clean the exterior of your iron, wipe over with a damp soft cloth and wipe dry.
Caution:
Do not use harsh abrasives, chemical cleaners or solvents to clean the exterior of
your iron as these will damage the surface.
Self-Clean Button
Helps to flush out impurities to prevent spotting on garments. Unplug the iron, and hold over
a sink. Press the button to flush water through the iron.
To clean the steam holes
To remove build up from the steam holes which may affect steam performance, use a cotton
wool tip moistened in methylated spirits.
Cleaning the EasyGlide
™
non-stick soleplate
The non-stick coating reduces sticking of fabrics and starches to the soleplate. Do not iron
over sharp objects such as buttons, studs and zippers, as these will scratch the surface.
Wipe the soleplate with a damp soft cloth after each use. If polyester has burnt to the
soleplate, iron a damp cotton cloth while hot.
Caution:
Do not use scouring pads, abrasives or harsh cleaners to clean your EasyGlide
non-stick soleplate, as these may scratch and damage the surface.
