Vitalcare 506DN3 Service Manual Download

Page: 7 / 254

Criticare Systems, Inc.

VitalCare

506N3 Series Service Manual

Page vii

NIBP Calibration ................................................................................6-6

Equipment Required .................................................................6-6
Installing the PC Service Program ............................................6-6
Configuring the Ports ................................................................6-6
Setup ........................................................................................6-7
Calibrate ...................................................................................6-8
Safety Test..............................................................................6-11
Speed Test .............................................................................6-14
Leak Test ................................................................................6-16
Accuracy Test .........................................................................6-20

Other Module Testing and Calibration.............................................6-22

Section 7 — Disassembly

Before You Begin ..............................................................................7-1

Service Safety...........................................................................7-1
Electrostatic Discharge Protection ............................................7-2
Tools Needed ...........................................................................7-2

Replace the Printer............................................................................7-3
Replace the Temperature Boards .....................................................7-5

Replacing the FasTemp Isolation Board...................................7-6
Replacing the FasTemp Board .................................................7-8
Replacing the TurboTemp Board............................................7-12

Replace the SpO

Board .................................................................7-13

DOX SpO

with TurboTemp or without Temperature .............7-14

DOX SpO

with FasTemp.......................................................7-15

Nellcor SpO

PCB/Carrier Board with TurboTemp or

without Temperature...............................................................7-18
Nellcor SpO

with FasTemp ...................................................7-19

Front Bezel Service .........................................................................7-22

Disassemble Front Bezel from Rear Housing.........................7-22
Replace Main Board ...............................................................7-24
Replace Speaker ....................................................................7-29
Replace LCD and LED Display Boards ..................................7-31
Replace Membrane ................................................................7-35

Chassis Service/Pump Disassembly ...............................................7-39

Replace ComfortCuff NIBP Module ........................................7-41
Replace Power Supply ...........................................................7-42

Completion of Service .....................................................................7-43

Section 8 — Troubleshooting

Troubleshooting Guide ......................................................................8-1