background image

4

IMPORTANT SAFEGUARDS

 

WARNING

To Avoid Injury.

Read and understand instruction manual 
before using your container.

IMPORTANT INSTRUCTIONS FOR SAFE USE

 

This product is intended for HOUSEHOLD USE ONLY and is not intended to be 
used for commercial purposes. 
Do not leave your Vitamix blender unattended when operating. 
Any repair, servicing, or the replacement of parts must be performed by Vitamix 
or an authorized service representative. 

  SAVE THESE INSTRUCTIONS

   

NOTICE:

  

THE FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS 

AND THE IMPORTANT INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR 
NEW VITAMIX CONTAINER WITH YOUR VITAMIX BLENDER THAT CAN VOID ALL 
WARRANTIES AND CREATE THE RISK OF SERIOUS INJURY. 

14. 

Blades are sharp. Handle or remove blade and blade assembly from the 
container with extreme care to avoid injury. To reduce the risk of injury, 
never place a blade assembly on the motor base unless assembled to the  
Vitamix container.

15. 

Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in 
the container as this will damage the blades and other components when 
starting the machine and may cause injury.

16. 

Never attempt to operate with damaged blades. 

17. 

Always operate blender with lid and lid plug firmly in place. The lid plug should be 
removed only when adding ingredients and when using the tamper.

18. 

When blending hot liquids or ingredients, use caution; spray or escaping 
steam may cause scalding and burns. Do not fill container to the maximum 
capacity. Always begin processing on the lowest speed setting. Keep 
hands and other exposed skin away from the lid opening to prevent  
possible burns. 

19. 

When making nut butters or oil-based foods, do not process for more than 
one minute after the mixture starts to circulate in the container. Processing 
for longer periods can cause dangerous overheating.

Summary of Contents for 3600 Container

















Reviews: