14
5.
Press in the Variable Speed Selector or press a program until it illuminates.
6.
Activate the blades by pressing Start ( )/Stop ( ). Your container may
shift and align itself. Follow the recipe and adjust the variable speed as
necessary.
7.
If the mixture stops circulating, insert the tamper through the lid plug and
stir the ingredients until it “burps” and the blades circulate the ingredients.
If this does not work, press Start ( )/Stop ( ) to stop the motor. Remove
the container from the motor base and use a rubber spatula to press the
air bubble away from the blades. Return the container to the motor base,
replace the lid and continue blending.
8.
Until you are accustomed to the blender, time blends carefully to avoid
over-processing.
9.
Allow the program to finish. The blade rotation will stop automatically at
the end of the program. If using Variable Speed, return the speed to 1. Press
Start ( )/Stop ( ).
10.
Wait until the blades stop completely before removing the lid or container
from the motor base.
Dry-Blade Container
Your dry-blade container should be used only for hard, dry materials, such as
grain, and for kneading dough.
1.
Load the container before placing it on the motor base.
2.
Fasten the 2-part lid securely. Always use the complete 2-part lid when
blending (unless the tamper is inserted through the lid plug opening).
3.
With the motor off, set the dry-blade container on the motor base by
aligning it over the centering pad. Never attempt to put a container onto
an operating motor base or to operate a motor base without a container
properly in place.
4.
To begin, make sure that the On/Off Switch is in the On (I) position.
5.
Press in the Variable Speed Selector or press a program until it illuminates.
6.
Activate the blades by pressing Start ( )/Stop ( ). Your container will shift
and align itself. Follow the recipe and adjust the variable speed as necessary.
7.
Until you are accustomed to the blender, time the blend carefully to avoid
over-processing.
8.
Allow the program to finish. The blade rotation will stop automatically at
the end of the program. If using Variable Speed, return the speed to 1. Press
Start ( )/Stop ( ).
9.
Wait until the blades stop completely before removing the lid or container
from the motor base.
