4
p
a r t S
a n d
f
e at u r e S
Pulse
Variable Speed
Dial with
Programs
OFF
ON
On/Off Switch
Blender with Variable Speed
Start/
Stop
Pulse
Technology
- The blender, containers and cups communicate through wireless
technology. Each container is programmed to run on the blender base for
optimum performance according to it’s size and functionality.
Legacy Vitamix Containers
- Legacy Vitamix containers will not work with your
Venturist blender base. Legacy machines are Vitamix C Series, G Series and S
Series. For more information about Vitamix products, please go to vitamix.com.
On /Off (I/O) Switch
- The On/Off switch (I/O) is located on the right side of the
blender base. The On/Off switch controls power to the machine.
Sleep Mode
- The blender will enter sleep mode if the control panel is not used after
30 seconds. The screen will dim. To exit sleep mode, rotate the variable speed dial
to the desired speed or program for your next blend.
Container Detect
- Three dashes (- - -) will display on the control panel if a container
is not on the blender base. Once a container is placed, 0:00 will show on the display.
Start/Stop ( I )
- Stop the blender at any time by pressing Start/Stop ( I ) .
Variable Speed Dial
- The Variable Speed Dial gives you manual control from
Variable 1 (slowest) to 10 (highest).
Pulse ( )
- The blades will rotate at the speed displayed on the control panel
when pressed.
Display
- The timer will count up when using variable speed until Start/Stop is
pressed. The timer will count down if a program is selected to run. Each container
is programmed with a specific maximum run time. The blender will shut down
automatically when the maximum run time has elapsed.
Programs
- The icons are listed in Vitamix recipes. The blender will stop at the end
of the program automatically. Programs can be stopped by pressing Start/Stop at
any time. Program times are not adjustable with the timer function. When Start/
Stop is pressed mid-program; the machine will stop and the program time will reset
on the display to the beginning of the run time. If the dial is moved to Standby ( ),
0:00 will be visible on the display.
Smoothies
Frozen Desserts
Soups
Self-Cleaning
Error Codes
- If you see an error code on the display make note of the numbers
on the display after the error code. Call Vitamix Customer Service for help with the
issue.. Recording the numbers isn’t necessary, but will give the Customer Service
team more information to help with the issue.
Motor
- The motor is designed to protect itself from overheating. If the blender
will not start immediately check to make sure you have plugged the unit in and
the On/Off switch is On. If the motor has overheated, allow the motor to cool for
20-45 minutes.
Tips to prevent ‘overloading’ your blender:
Process only Vitamix recipes when learning to use the blender.
Do not process recipes at lower speeds than recommended.
Do not process recipes at higher speeds than recommended.
Do not process recipes for longer than recommended. Use your tamper to
process thicker mixtures and keep ingredients moving around and through the
blades.
Tamper
- Lids and tampers are not interchangeable between different container
styles, types and sizes. Use the tamper that was supplied with your blender.
The container should not be more than two-thirds full when the tamper is used.
Variable
Speed Dial
Blender with Variable Speed and Programs
Timer
Start/
Stop
Timer