7
Cleaning
It is recommended that the machine pipe work, strainers and nozzle filters are thoroughly washed out
after every use to avoid cross contamination of products and to extend the pump life. Follow the
instructions printed on the side of the tank. These instructions are duplicated below:
1.
Always read and comply with the manufacturer’s instructions for the handling of the product
being sprayed.
2.
Empty the contents of the tank into a suitable container.
3.
Fill approximately 2 litres of cleaning fluid/water into the tank and rock the tank gently back and
forth to clean the tank.
4.
Spray approximately 1 litre of the cleaning fluid through the machine as normal.
5.
Tip the tank to empty the remaining cleaning fluid out of the tank.
Technical Specification and Calibration Guide
The EvenSprey CLUB is categorised as a PA1 and PA6A spray applicator. Commercial use of this spray
equipment requires BASIS qualification relevant to PA1 and PA6A equipment.
EvenSprey CLUB Technical Specification
Machine Only
Machine Boxed
Length
1240 mm
1000 mm
Height x Width
1000 mm x 580 mm excl boom
595mm x 600mm
Weight
20.0kg
24.0kg
Wheels
Tubed
Framework
Triple zinc galvanised lightweight tube
Tank
25 litre moulded
Battery
9.0 amp hour cyclic rechargeable battery
Battery Charger
3 stage charger
Pump
Shurflo with in-line strainer
Fuse
5A blade fuse
Boom
1.5 metre 3 nozzle aluminium tubular boom
Nozzle Filters
50 mesh
Nozzles
3 x Brown 05 110° standard flat fan
Summary of Contents for Supaturf EvenSprey CLUB
Page 1: ...EvenSprey CLUB Operator Manual...
Page 11: ...11 NOTES...
