MODEL: WAY
LANGUAGE: ENGLISH VERSION: 2021-08
VITEACARE.COM 5
2. USAGE
• After unpacking the packaging, check that it contains all the parts according to the list of
components above.
• Make sure that all elements have no visible mechanical damage. If in doubt, contact the
manufacturer.
• The module should not be used until all components are properly assembled on the
wheelchair.
2.1 ASSEMBLY - CROSS FRAME
WHEELCHAIR
1. Attach the spreader bar (Fig. 4.) to the wheelchair.
a) Unfold the wheelchair and attach the spreader bar to the two vertical tubes on the
back of the wheelchair (Fig. 7.).
b) Select the appropriate width of the bar and tighten the bolt and eccentric clamps
(Fig. 8.).
• tighten the screws of the eccentric clamps
• tighten the eccentric screws.
Eccentric
clamp
Spreader bar for a
wheelchair, diameter
22 - 32mm
Tighten the screw
Eccentric
clamp
Vertical tube of the
wheelchair frame
Screw
Fig. 7.
Fig. 8.
