13
Ilustracja 20.
WHEELCHAIR HEIGHT
Wheels are mounted on movable axes; You can change wheel height on the front and rear
axles.
Illustration 21. shows the wheel axle seen from the outside, and Illustration 22. shows a wheel
axle, seen from the inside.
Illustration 21. Illustration 22.
Change the rear wheel height can be made only in situations when the patient is not sitting in a
wheelchair.
Please press the black button to remove the wheel / quick release and remove the wheel. Look
out the wheelchair to not fall over. (Illustration 21.)
You can put a wheelchair on the side which has already been removed rear wheel and remove
the other rear wheel.
To change the position rear wheel axis (up and down), unscrew the Allen wrench No. ......
screws located next to the rear wheel axle. (Illustration 22.)
After loosening the screws, you can remove the axle and place it in the appropriate mounting
holes and tighten the nut with an Allen wrench.
Make sure that the axes of both rear wheels were arranged symmetrically on both sides of the
frame of the wheelchair and properly tightened.
With the change in position of the rear wheel, should adjust the brake mechanism.
Rear wheel mount axle
Rear wheel mounting element
Quick connect handle
